+ The SARS-CoV-2 Spike Protein Antibodies Test is a fluorescence immunoassay used along with Genrui FA Meters for qualitative and semi-quantitative
+ Detection of Spike Protein Antibodies of SARS-CoV-2 in human finger stick whole blood, venipuncture whole blood, serum or plasma specimen.
+ The SARS-CoV-2 neutralizing antibodies are protective antibodies produced by the human body after injection with SARS-CoV-2 vaccine or infection with SARS-CoV-2.
Spike Protein Antibodies Test Kit
- Product Brief:
+ Generic name: SARS-CoV-2 Spike Protein Antibodies Test Kit (Immunofluorescence）
+ The SARS-CoV-2 Spike Protein Antibodies Test is a fluorescence immunoassay used along with Genrui FA Meters for qualitative and semi-quantitative
+ Detection of Spike Protein Antibodies of SARS-CoV-2 in human finger stick whole blood, venipuncture whole blood, serum or plasma specimen.
+ The SARS-CoV-2 neutralizing antibodies are protective antibodies produced by the human body after injection with SARS-CoV-2 vaccine or infection with SARS-CoV-2.
+ The test is intended as an aid to assess the adaptive humoral immune response to the SARS-CoV-2.
- For in vitro diagnostic use only. For professional use only.
Product Specifications:
- Test Method
Carefully read the reagent instruction before using the test kit and strictly operate according to the instruction to ensure reliable results.
Bring all reagents to room temperature (18-25℃) before use.
+ (1) Startup: Click “STD Mode” in the main menu to enter the measurement interface,
click “Item” to select the desired test item and click “Type” to select the sample type.
+ (2) Click “Lot No.” to enter the card swiping interface, place magcard of the corresponding item to the magnetic induction zone,
when hearing a “di” sound, the magcard is swiped successfully, check whether the magcard and the test card are of the same batch.
(Note: reagents are precalibrated and specific calibration curve parameters for each batch of reagents have been stored in the magcard.)
+ (3) Remove the test sample and required reagents from storage conditions and equilibrate to room temperature.
+ (4) Remove the test card from the packaging bag and lay it flat on a dry surface.
+ (5) Sampling:
(a) Samples: Take 40 μL of samples and add them to the sample diluent (160μL) mix thoroughly for 30s.
Take 100 μL diluted sample, drop vertically to the sample port on the test card directly and start timing.
(b) After adding the sample, the positive sample can be detected within 15 minutes,
Recommended that the final test results be recorded and recorded within 15-20 minutes.
